If your device is running…
</td>
<td valign="top" width="613">
Then…
</td>
</tr>
<tr>
<td valign="top" width="399">
RedHat Enterprise Linux,CentOS or CloudLinux
</td>
<td valign="top" width="613">
Determine if the cifs-utils utility is installed by running the
following command:
root@slnastest [~]# rpm -q cifs-utilsNote: If
cifs-utils is not installed,the following message will appear:
package cifs-utils is ?not installed
- If
cifs-utils is installed,proceed to the next step.
- If
cifs-utils is not installed,install the utility using the following command:
root@slnastest [~]# yum
install cifs-utils
</td>
</tr>
<tr>
<td valign="top" width="399">
Debian or Ubuntu
</td>
<td valign="top" width="613">
Determine if the cifs-utils utility is installed by running the
following command:
root@slnastest:~# dpkg-query -S cifs-utils
Note: If cifs-utils is not installed,the following message will appear:
dpkg-query: no path found matching ??pattern *cifs-utils*.
- If cifs-utils is installed,proceed to the
next step.
- If cifs-utils is not installed,install the
utility using the following command:
root@slnastest [~]# apt-get install
cifs-utils
root@slnastest:~# dpkg-query -S cifs-utils
cifs-utils: /usr/share/doc/cifs-utils
cifs-utils: /usr/share/doc/cifs-utils/changelog.gz
cifs-utils: /usr/share/doc/cifs-utils/NEWS.Debian.gz
cifs-utils: /usr/share/doc/cifs-utils/changelog.Debian.gz
cifs-utils: /usr/share/doc/cifs-utils/copyright
</td>
</tr>
- Create the directory and mount the device using the following commands:
mkdir /local/mountpointmount
-t cifs //Hostname/Username -o
username=username,password=password,rw,nounix,iocharset=utf8,file_mode=0644,dir_mode=0755
/mnt Example:??? root@slnastest [~]# mkdir /mnt/nas???
root@slnastest [~]# mount -t cifs
//nas05.service.softlayer.com/SL12345-1 -o
username=SL12345-1,password=NASPASSWORD
rw,dir_mode=0755 /mnt/nas??? root@slnastest [~]# df -Th /mnt/nas/Filesystem??? Type??? Size? Used Avail Use% Mounted on??? //nas05.service.softlayer.com/SL12345-1????????????? cifs???? 54T?? 49T? 5.3T? 91% /mnt/nas
- Determine if the NAS should mount on reboot.
If the NAS should…
</td>
<td valign="top" width="613">
Then…
</td>
</tr>
<tr>
<td valign="top" width="399">
Mount on reboot
</td>
<td valign="top" width="613">
Add the following command to the /etc/fstab file:
??? //nas05.service.softlayer.com/SL12345-1??????? /mnt/nas ??? ??? cifs
defaults,username=SL12345-1,password=NASPASSWORD 0 0
</td>
</tr>
<tr>
<td valign="top" width="399">
Not mount on reboot
</td>
<td valign="top" width="613">
Proceed to the next step.
</td>
</tr>
- Unmount and mount the NAS to verify that the fstab was edited
correctly.? Refer to the table below for the unmount and mount commands.
</td>
<td valign="top" width="613">
<p align="center">Command
</td>
</tr>
<tr>
<td valign="top" width="399">
Unmount the NAS
</td>
<td valign="top" width="613">
root@slnastest [~]# umount
/mnt/nas/
root@slnastest [~]# df -Th
/mnt/nas
Filesystem??? Type???
Size? Used Avail Use% Mounted on
/dev/xvda2??? ext3????
25G? 4.6G?? 19G?
20% /
</td>
</tr>
<tr>
<td valign="top" width="399">
Mount the NAS
</td>
<td valign="top" width="613">
root@slnastest [~]# mount
/mnt/nas/
root@slnastest [~]# df -Th
/mnt/nas/
Filesystem??? Type???
Size? Used Avail Use% Mounted on
//nas05.service.softlayer.com/SL12345-1
????????????? cifs???? 54T??
49T? 5.3T? 91% /mnt/nas
</td>
</tr>
（编辑：ASP站长）
【免责声明】本站内容转载自互联网，其相关言论仅代表作者个人观点绝非权威，不代表本站立场。如您发现内容存在版权问题，请提交相关链接至邮箱：bqsm@foxmail.com，我们将及时予以处理。
